Just Barcodes Help - Output Options
You can choose to enter the resolution you require for the barcode image directly, or allow Just Barcodes to use the resolution of your current printer instead:
Using the printer resolution is suitable only if the current printer is the same as the one that will be used to print the barcode, and if it configured correctly. For this reason, it is normally best to specify the resolution directly instead, as shown above.
You can choose resolution units of dpi (dots per inch) or dpmm (dots per millimetre):
Sizes can be displayed in inches or millimetres:
When using inches, Code 39, Interleaved 2 of 5 and ITF-14 use mils for their bar widths (1 mil = 0.001 inch).
When using mm, Code 39, Interleaved 2 of 5 and ITF-14 use microns for their bar widths (1 micron = 0.001 mm).
You can specify one of four orientations (rotation values) for the barcode image:
You can choose to automatically generate default names for your barcode image files:
Copyright (c) 2004-2016 Neon Sine Software. All rights reserved.